AIR SPARGE SERVICE

After a lot of planning and research, FRUITS has designed what we feel to be the most versatile, environmentally safe and effective Air Sparging platform for performing air sparge pilot testing and to enhance the rate of mass removal during an HVR/MEME event. We have designed this system to be used in conjunction with our High Vacuum Remediation (HVR) units to greatly enhance soil vapor/multi-phase recovery rates. As with all of our units, it is 100% mobile and is designed to provide a turn-key service at each and every site. Below is a general outline of our new Air Sparge Platform:

01.

Design

Unit was designed with a 20 hp reciprocating compressor powered by a twin-cylinder diesel engine with a fuel storage capacity to provide 3 days of continuous operation.

02.

Compressor

The reciprocating compressor has an operating range of 0 to 50 psi of pressure at 90 to 100 CFM of air flow and utilizes environmental safe food grade lubricants. Additionally, and as a redundancy measure, the compressor is equipped with two stage inline air/oil separating filters. The compressor is also equipped with a custom made inter-cooler system to reduce the temperature of the compressed air to a safe operating level.

03.

Connections

The system can connect to up to five air sparging points via a manifold system and each manifold connection is outfitted with a pressure regulator and gauge, along with a Dywer SCFM air flow meter. This allows FRUITS to adjust the pressure and air flow to each individual point.

04.

Equipped

The unit is also equipped with custom made marine grade aluminum wellhead assemblies that have been pressure tested at over 100 psi, along with all the associated hoses and fittings needed.